OKI X400 Instrukcja Użytkownika Pobierz pdf (Strona 16)

Note

When holding the FEED button, the indicator status will

change, but should be ignored even if the ERROR indicator

becomes lit.

Printing Labels

To print labels, the host computer sends commands to the printer via the

serial or parallel communication port. If you are using label printing

software, the computer and software control the entire printing process.

You only need to set up the printer, start your label printing program, and

follow its instructions. Contact the software supplier or manufacturer if

you encounter difficulties.

Controlling the Printer Using Direct Commands

You can also produce labels by sending commands directly to the printer.

Simple ASCII commands control the printer. You can write command

files using any text editor program that can output ASCII text (including

the control codes). Since printer programming is potentially complex,

programming information is not provided here. A printer command

reference and basic programming procedure are provided on the

CD-ROM packed with the printer. The file OKIPOS X400 Manual.pdf

on the disk is in Adobe Acrobat format, readable using the Adobe

Acrobat Reader provided in the AcroRead directory on the CD-ROM or

can be downloaded free of charge from http://www.adobe.com. This

program will allow you to search the contents of the manual and/or print

a hard copy. If you need programming information and are not using

Windows, contact our Service Hotline.

Routine Maintenance

OKIPOS X400 needs very little maintenance other than occasional

cleaning. If cleaning the printer body is required, using soft cloth

moistened with a mild detergent cleaner. Clean the print head if it

appears dirty or if print quality is poor. Print head cleaning is easy and

fast:

1. Unlatch and raise the print head if it is not already raised.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

Brak uwag

OKI X400 Instrukcja Użytkownika Strona 16