Oki 59375102 Instrukcja Użytkownika

Hard Disk Drive (HDD)Installation Instructions59375102

10Activate the HDD in the DriverWindows®Postscript Emulation Driver1. FirstWindows Vistaa. Click Start → Settings → Hardware and Sound → Printer.The

115. Select Installed.6. Click OK and close the dialog box.PCL Driver1. FirstWindows Vistaa. Click Start → Settings → Hardware and Sound → Printer.T

12Macintosh®Mac OS 10.2, 10.3, 10.41. FirstOS 10.2a. Activate Print Center: Local Hard Drive → Applications → Utilities → Print Center.OS 10.3, 10.4

© 2007 by Oki Data Americas, Inc. All rights reserved.Every effort has been made to ensure that the information in this document is complete, accurate

3Prepare the Printer1. Turn off the printer.2. Detach the power cord from the back of the printer.3. Detach the interface cable from the back of the p

45. Open the control board cover by pulling out and to the left.

5Install the Hard Disk Drive (HDD)1. Locate the drive connector (1) on the control board:

62. Remove the hard disk drive from its shipping package. Caution!Observe antistatic precautions when installing the hard disk drive.3. Lift the handl

74. Press down on the handle to lock it in place.

8Complete the Installation1. Close the control board cover and reinstall the screws at the top and bottom.2. Reattach the interface cable, then the po

9Verify the InstallationPrint the Configuration Report 1. Press Enter to access the printer menu.2. Press Enter to select Configuration.3. Press the ∇